We ship with FedEx across the USA and Canada

Each transmitter and receiver pair is synchronized together at the factory. However, if a new transmitter is needed, or something happens that causes the two to lose sync, then re-synchronization is required.

Please use the following procedure:
  1. Make sure both the transmitter and receiver are off.
  2. Press and hold the POWER button on the transmitter for more than 10 seconds. The red and green LED will start to blink.
  3. Apply power to the receiver and wait for a few seconds until only the green LED begins to blink on the transmitter
  4. Teach complete
Sale

Unavailable

Sold Out